Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
one_co_il
New Contributor

Redundant IPsec From 2 Interface to 1 Interface

Want to config 2 IPsec tunnel from different WAN1 to the Fortigate with only WAN1 Interface

Wan1 to Wan1 IPsec is working, I did config the same setting for WAN2 to WAN1 but getting negotiation error

 

IPsec Diagram:

WAN1-------IPsec----------Wan1

WAN2-------IPsec----------Wan1

1 REPLY 1
sw2090
Honored Contributor

I might have had the same.

This is probably due to the way Fortinet differs the tunnels.

I hade similar issues.

 

When I have two vpns that have the same proposals and use the same FGT als remote gw then one worked and one didn't and I say that was beause the remote gw FGT connected the 2nd to the wrong tunnel. 

In Fact they only worked when they had different proposals...

-- 

"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams

-- "It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
Labels
Top Kudoed Authors