Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
nabz0r
New Contributor

RDP

Hi,

I am new to FortiGate firewalls and today I changed my ASA to FGT60 but after the change I can't RDP to my server nor to other Windows PC from my Mac. There are no rules for inside/internal network and everything is on the same network so it should work. I changed back to my ASA and it worked again.

 

It's a normal setup fiber -> fgt -> accesspoint and the reset of the network. Have I missed something or do I need to allow/add rules? Thanks in advanced!

3 REPLIES 3
abarushka
Staff
Staff

Hello,

 

For connectivity related issues I would recommend to collect debug flow and traffic sniffer. Please find the details by following the link below:

 

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connecti...

FortiGate
malam
Staff
Staff

Hello nabz0r,

If you are accessing your Machines from the Internet as per your setup from fiber side, you need to have a firewall policy to allow access from outside to inside. Even you can configure VIP to access your servers from outside like explained in this document.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Use-RDP-via-VIP/ta-p/210093

Regards,

 

Mahboob Alam
ntaneja
Staff
Staff

Hi nabz0r

 

Please explain the expected traffic flow in network , details of source and dest Ip address.

 

Thanks

Labels
Top Kudoed Authors