Question about natting with sslvpn

clevend · ‎07-23-2022

So a previous admin started to setup this with the vendor but didn't finish, right now we have a ssl vpn setup with the vendor, it's a single ip in the vendors side and a /24 on our side as the local address in phase 2 but the entire /24 local address on phase 2 is then natted to the actual local address of the host network on our side. Tunnel is up and we can access the single ip on the vendor side but vendor cannot hit their devices on our side. Any help would be appreciated

10.0.0.0.1 192.168.1.254

Anonymous · ‎07-25-2022

Hello @clevend ,

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Regards,

Fortinet Community Team.

Muhammad_Haiqal · ‎07-25-2022

Hi @clevend ,

Do you mind to share the IP address here so its more easier to assist you properly?

Local & subnet network on Fortigate

Local & subnet network on peer

What is the NAtted IP on peer?
What destination IP you want to access from both side?

haiqal