Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
tnhafiz
New Contributor II

MAC Access Filter for FortiGate 60D

Hi guys...

 

I have one question. I need to know whether fortigate 60D got mac access filter or not?

I have tried to search in system>network>interface>(please refer attachment)...but under dhcp setting, there is no option for mac acees filter.

 

Thanks for help in advance

1 Solution
ede_pfau
Esteemed Contributor III

Enable this in the CLI:

- on the Dashboard, click into the Console window

- enter:

config system global

 

    set gui-dhcp-advanced enable

 

end

Now you'll have an "Advanced..." link just below the DHCP settings section in System>Network>Interfaces><name>


Ede

"Kernel panic: Aiee, killing interrupt handler!"

View solution in original post

Ede"Kernel panic: Aiee, killing interrupt handler!"
5 REPLIES 5
wanglei_FTNT
Staff
Staff

I have a FWF60D which should be the same for this.  go to advanced then MAC reservation + Access control

tnhafiz

Hi wanglei...for your info, mine is FGT60D.and as you can see in my attachment as above, there is no advanced option under the DHCP setting.

 

thank you

ede_pfau
Esteemed Contributor III

Enable this in the CLI:

- on the Dashboard, click into the Console window

- enter:

config system global

 

    set gui-dhcp-advanced enable

 

end

Now you'll have an "Advanced..." link just below the DHCP settings section in System>Network>Interfaces><name>


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
n00b
New Contributor

What FortiOS firmware version is installed in FG-60D?

tnhafiz
New Contributor II

thank you so much ede_pfau.that has solved my problem

Labels
Top Kudoed Authors