I have setup a new vpn ipsec tunnel between two fortigates running 5.0.3.
SA proposal chosen, matched gateway PROD_VPN_P1
peer is Fortigate/FortiOS (v5 b208)
and then I get the following message in the debugs
ike 0:PROD_VPN_P1:2806: remote address a.b.c.d does not match configuration address a.b.y.z, drop
Not sure whats happening.
i am facing an issue in site to site ipsec vpn, tunnel is up , and i can access remote LAN. but remote lan can not access me, although the policies which i made for remote lan, in that policy i allowed access for remote lan, but still other party is unable to access my lan, can any body guide me what can be the issue.
I meet the error as well , there is a Cisco router 2911 build site to site VPN to fortigate 500D . It's not work and I enable debug on fortigate , I found the error "remote address 188.8.131.52 does not match configuration address 184.108.40.206, drop" . there is nothing VIP config about 220.127.116.11 . IP 18.104.22.168 is router's public IP.