IP Sec Tunnel Interface is UP, but i can't do a ping to remote pc
Hi, I have 2 fortigates a 60E and a 20C I have established the IPSec tunnels for site-to-site vpn. The tunnel in both fortigates appears to me to be up, but I cannot ping between the lan networks. I have set the static route and added the access policies. I don't know what else to do. And if I check the IPSec monitor, I see that there is incoming and outgoing traffic.
Hi ShivSagar, thank you. Yeah, in the firewall policy i logging all allowed traffic. With the packet debug flow i see the packet that i send in both fortigates coming in the VPN interface. But still it doesn't ping, what I notice in both fortigates on the IPSec monitor is that there is only Outgoing Data and no Incoming Data.
I don't know what else to do, and I eliminated the VPNs and recreated them, I did a flush and reset the tunnel and it remains the same :(
Hi Bob, thanks for your time, I have configured the static route with the distance in 1 in both fortigates. But I still don't ping. If you have time and even if there is a cost involved, could you help me to solve this problem please