Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
connect555
New Contributor

HA failure

Hi, i have a cluster of 2 FG110C which worked fine as AA-Cluster until yesterday. Without any configuration changes or other updates, the ' slave' unit (the one with the lower priority) reports following every minute: " date=2011-04-10 time=15:09:02 devname=FG100C####### device_id=FG100C##### log_id=0105037903 type=event subtype=ha pri=information vd=" root" msg=" The sync status with the master" sync_type=external-files sync_status=out-of-sync" " A diagnose debug on the unit shows: " slave' s external files are not in sync with master, sequence:0. (type IDS)" A ' diagnose debug application hasync -1' says " ha_diff.c:ha_diff_check_sync:464, slave cannot start sync configuration because some external files haven' t been sync' d" What are these external files, and what can I do? I' ve tried to stop and restart the sync-process and have manually execute a sync-process, without any success. Firmware is v4.0,build0279,100519 (MR2 Patch 1)
3 REPLIES 3
harald21
Contributor

Hi, do you have valid support contract (av+ips) for both units? Please diag the following: diag deb console timestamp en diag deb app hatalk -1 diag deb app hasync -1 diag deb en Please update your firmware to v4.2.5 this is much more stable! Sincerely Harald
connect555
New Contributor

mmmhh... after an automatic restart (why?!) of the second (slave) unit, anything works fine again... An Update is planned for the next weeks... thanks!
rwpatterson
Valued Contributor III

Check the release notes to see if there are HA issues with the firmware level you are on.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
Labels
Top Kudoed Authors