Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
lost_ship
New Contributor

Fortigate 90D two network

i have the following situation

i have and adsl line connected to the external, i created a VPN network on it on other location, the vpn work great with no issues,

my router is 192.168.11.200 and my other network VPN tunnel is 192.168.20.1

but i have another network , MPLS network, with a bridge gateway 192.168.11.1 and connected to other subnets outside my offices , the problem as follow, 

i want to configure -route or policy- between the VPN tunnel and the other MPLS network , HOW?

3 REPLIES 3
Pradhumna_FTNT

Hi,

 

 

If the phase2 is configured with Source and destination network as 0.0.0.0/0, great ,else first step would be to create phase2's for the MPLS networks.

 

Then create a firewall policy from VPN interface to MPLS interface (Where the MPLS router is conencted) and enable the NAT on the firewall policy.

 

Regards,

Pradhumna chnadra

lost_ship

Dear Pradhumna_FTN

 

I think that i didn't understand you clearly , My MPLS is from ISP ,I cannot modify it or add a phase 2 to it

another thing, what about source and destination 0.0.0.0/0 , i'm a newbie , how to do that?

 

Here is my structures :

 

VPN-Tunnel ---------------------- HQ -----------------------------(MPLS)

192.168.20.0/24        192.168.11.200/24                  192.168.11.1/32

 

I wonder if you can help me with more detailed steps

lost_ship

Can any one help me with this issue

Labels
Top Kudoed Authors