Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
hanifannuman
New Contributor II

Fortigate 60D ISP speed limit

i just want to check i have upgrade the ISP line 800 download 200 upload
when i do speed test internal network i get 110 download 110 upload
but when direct ISP router i get 700++ download 150++ upload
this is becuase the fortgate 60D box limit or setting?

23 REPLIES 23
yfxwj

Hello,

      If ask  ISP to switch from PPPoE to DHCP will can't  obtain IPv6 address.

aahmadzada

Well, that is a limitation on the ISP side then.
Explain to them the reason you can`t use PPPoE. That might somehow force them to provide you a solution

Ahmad
EEHC

First-level support usually has limits. You have to ask for higher-level support.

 

Mohamed Gaber

EEHC
EEHC
EEHC

I enjoy reading all the replies.

 

Mohamed Gaber

EEHC
EEHC
hanifannuman

Dear aahmadzada,

 

tq for you advise i will apply this setting after operation hours.

 

Thank You,

Hanif

EEHC
Contributor

I believe the role of the interface should be set to WAN and the bandwidth has to be configured on the interface. The devices detect the speed from the speed of the physical interface. It could not know the speed of the link connected to the router. This causes a problem with WAN optimization devices.

 

Mohamed Gaber

EEHC
EEHC
hanifannuman
New Contributor II

Dear Mohamed Gaber,

 

mean need to config wan interface bandwidth?

 

 

 

 

Thank You,

Hanif

EEHC

config system interface
edit "port1"
.....
set role wan
set inbandwidth 200
set outbandwidth 400
.....
next
end

EEHC
EEHC
yfxwj
New Contributor

No,the operational is vain. Beacuse when Fortigate 60D use PPPoE is handled by PPP software process and connections are terminated in virtual interfaces. Therefore PPPoE connection cannot be offloaded to the hardware and can`t be accelerated.

EEHC
Contributor

EEHC
Labels
Top Kudoed Authors