Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ac1
Contributor

FortiSwitch MCLAG ICL and FortiGate

Hi guys,

I configured an infrastructure with 2 FortiGate Active-Passive and 2 FortiSwitch 1024D. 

The MCLAG is active and the network work. But I have a question.

In a second moment I see this document.

Is it necessary replicate the configuration of MCLAG on configuration of FortiGate?

 

config switch-controller managed-switch
edit "<switch-id>"
config ports
edit "<trunk name>"
set type trunk
set mode {static | lacp-passive | lacp-active}
set bundle {enable | disable}
set members "<port>,<port>"
set mclag {enable | disable}
next
end
next

 
1 Solution
orani
Contributor II

No this is a configuration to create an agregate interface to connect a server or any other device using more than one cable

Orestis Nikolaidis

Network Engineer/IT Administrator

View solution in original post

2 REPLIES 2
orani
Contributor II

No this is a configuration to create an agregate interface to connect a server or any other device using more than one cable

Orestis Nikolaidis

Network Engineer/IT Administrator

ac1

Ahhn ok. I misanderstood the guide. Thanks