Hi i am new to this, i have a FortiSwitch 1024D that can only indentify the transceiver on any given port after a reboot.
Is there a command that can refresh or reset a transceiver on a port?
It's not necessary to reboot FortiSwitch for a transceiver to be recognised. Make sure you're using a compatible transceiver (https://docs.fortinet.com/document/fortiswitch/6.4.4/fortiswitch-compatible-transceivers).
Rafael Gracioli | Consulting Systems Engineer, ADC and Switching
m: +31 6 50 28 72 99 | skype: rgracioli | e: email@example.com
Hi, the transceiver is SFP1G-LX-31 1000Base SFP 1310nm 10KM, is this compatible with this unit?
Hi, the type mentioned is supported, but you may be using a transceiver model that is not MSA compliant. I suggest that you open a case with support to have it checked.
Is there a command line that can help me check that?
I have notice the following error in the events of the fortiswitch "failed BASE ID Check Sequence" in the port where the transceiver is connected.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2022 Fortinet, Inc. All Rights Reserved.