Hello,
I have a situation on a FortiManager lab: i've added a FortiGate 70D version v5.6.2 build1486 (GA) to the latest and fresh-installed FortiManager version, v5.6.0-build1557 170727 (GA). When i first add the device there are no conflicts nor errors, then i modify -via FMG- a tiny object and when i try to apply the changes i see lots of stuff being updated, such as:
[ul]
VPN Certificate CA (root_Internal_CA)UUIDs for IPv4 addresses: SSLVPN_TUNNEL_ADDR1, all.UUIDs for IPv6 addresses: SSLVPN_TUNNEL_IPv6_ADDR1, allSettings for the webproxy custom service.Settings for switch controller security policy 802-1X-policy-defaultSettings for lots of wtp-profiles: FAP221E-default, FAP222E-default, FAP223E-default, FAPS221E-default, FAPS223E-default, FAPU221EV-default, FAPU223EV-default, FAPU321EV-default, FAPU323EV-default.[/ul] This fails. I've attached the log to this post. After that the device is always in a "conflict" state.
FWIW, when i imported it, i said that FMG should use the settings from the device.
"diagnose dvm supported-platforms list" shows, to my understanding, that it should be supported:
fmg.druidics.local # diagnose dvm supported-platforms list
product abbrev fdsid support-versions
FortiGate:
Supported Versons:
version: 500, mr: 0, branchpt: 1-484
version: 500, mr: 2, branchpt: 485-891
version: 500, mr: 4, branchpt: 892-1390
version: 500, mr: 6, branchpt: 1391-2000
[...]
FortiGate-70D FGT70D FGT70D v5.0/5.2/5.4/5.6
FortiGate-70D-POE FG70DP FG70DP v5.0/5.2/5.4/5.6
Any clues? Thanks in advance.
