Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Kaplan
Contributor

FortiClient

Dear People,

 

I created 2 IPSEC VPN Tunnel (Remote Access) with different settings.

Kaplan_0-1642081343704.png

Only the first createt tunnel does function.

The second VPN Tunnel does function only if I disable the Interface from first Tunnel.
Whats wrong:-)

 

Kaplan_1-1642081491391.png

Both VPN Tunnel does function if I use different WAN Outgoing connections (different WAN IP).

3 REPLIES 3
Debbie_FTNT
Staff
Staff

Hey Kaplan,

with multiple IPSec tunnels on the same interface, FortiGate needs some kind of indication to select the correct tunnel.

Check these links regarding peertype configuration:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dia...
https://community.fortinet.com/t5/Fortinet-Forum/Multiple-IPSec-tunnels-on-single-interface/m-p/4459...

+++ Divide by Cucumber Error. Please Reinstall Universe and Reboot +++
Kaplan

Dear Debbi

 

thax again. You are the best. I gave the second IPSEC Connection a peer ID.
Now I can use both of them.
Kind Regards

ctanev1
Staff
Staff
Labels
Top Kudoed Authors