Created on 11-17-2021 08:43 PM Edited on 11-17-2021 08:44 PM
Did anyone notice your FG40F's SPEED LEDs on the front panel never light up for LAN1-3 and A ports, while it works fine (orange=100M/green=1G) on WAN port? I have two of them showing in the same way.
And if anyone has a 40F with SPEED LEDs working fine, please let me know the FortiOS version and hard-swich configuration involving those LAN ports. I'm assuming by default all ports have "set speed auto", which I didn't change.
I ran "diag hard test led nic-led" based on TAC's request.
None of those LAN and even WAN LEDs turned on either green or amber. But the fact is LAN LINK LEDs and WAN LINK/SPEED LEDs are working fine. So I'm now not even sure if HQIP software is working as it should.
Created on 11-19-2021 12:57 AM Edited on 11-19-2021 12:58 AM
This misbehavior has been noticed in FOS 6.4.6 and later versions for FGT40F.
Upgrade your FGT to 7.0.2 and test it. It has resolved this issue in some cases.
I confirmed 6.2.10 fixes the problem. According to TAC, they're still working on 6.4.x for this issue so likely we need to wait until 6.4.9.