Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Palamar
New Contributor

Dialup - FortiClient (Windows, Mac OS, Android) status inactive

I created Dialup - FortiClient (Windows, Mac OS, Android) to connect through the Forticlient.

But in the  ipsec - tunells status inactive.Why?

 

FortiOs v5.2.11,build754

4 REPLIES 4
ede_pfau
Esteemed Contributor III

Because nobody has dialled in yet.


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
Palamar
New Contributor

forticlient does not connect

used this instruction [link]https://www.youtube.com/watch?v=5MIrgkFcuW0[/link]

Toshi_Esumi
Esteemed Contributor III

-Is the server reachable?   -> ping from the client device to your FG

-Is the vpn request packets hitting the FG interface?  -> sniff at the interface while try connecting (diag sniffer packet INTERFACE 'host SOURCE_PUB_IP')

If not, you need to troubleshoot the client device and local internet.

If both are ok, you need to run ike app debug on the FG like in below cookbook.

http://cookbook.fortinet.com/ipsec-vpn-troubleshooting/

That would probably tell you why your FG doesn't accept the vpn request.

 

 

Kazim

Hi Palamar ,

did you solved this issue ?

 

Labels
Top Kudoed Authors