Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ABUELKHAIR
New Contributor II

DHCP exclusions more than three subnets

I am moving the DHCP from the windows server to the Fortigate, and the existing DHCP exclusions are more that three subnets like 6 

In the GUI configuration i can add only three exclusions, can i add more using the command like when i configure the DHCP or still limited to three ?

 

Thanks

2 Solutions
anikolov

Hello Abuelkhair,

 

I have tried the same in the lab for 7.0.6 version but it does not seems possible, only 3 ranges are allowed:

 

I get this output: edit 0
Command fail. Return code -4 (reached the maximum number of entries)

 

On which version are you? What is the hardware?

 

Regards,

Aleksandar Nikolov

View solution in original post

bpozdena_FTNT

Please note that you can't configure more than 3 DHCP IP ranges on any Fortigate model or FortiOS version.

bpozdena_FTNT_0-1663772969654.png

 

You can verify limits in the Maximum Values Table

HTH,
Boris

View solution in original post

5 REPLIES 5
ABUELKHAIR
New Contributor II

To be more specific i can add three ranges only but i need to add 6 ranges so can i do that from the command line or still limited to 3

anikolov

Hello Abuelkhair,

 

I have tried the same in the lab for 7.0.6 version but it does not seems possible, only 3 ranges are allowed:

 

I get this output: edit 0
Command fail. Return code -4 (reached the maximum number of entries)

 

On which version are you? What is the hardware?

 

Regards,

Aleksandar Nikolov
ABUELKHAIR
New Contributor II

@anikolov Yes its limited to 3 only regardless to the firmware or model

bpozdena_FTNT

Please note that you can't configure more than 3 DHCP IP ranges on any Fortigate model or FortiOS version.

bpozdena_FTNT_0-1663772969654.png

 

You can verify limits in the Maximum Values Table

HTH,
Boris
ABUELKHAIR
New Contributor II

@bpozdena_FTNT 

Thank you very much! that was really helpful