DHCP Server on Intrface only deploys 1 DNS IP to clients
Is it a bug or did we something wrong? On a FW60D with 5.6.3 we have the DHCP server configured on the Internal Interface with 3 DNS servers, but on the clients we just always get 1 DNS IP.
config system dhcp server edit 1 set lease-time 43200 set forticlient-on-net-status disable set ntp-service default set default-gateway 192.168.5.1 set netmask 255.255.255.0 set interface "internal" config ip-range edit 1 set start-ip 192.168.5.100 set end-ip 192.168.5.250 next end set timezone-option default set dns-server1 192.168.5.1 set dns-server2 172.17.36.60 set dns-server3 184.108.40.206 next
But on all Win Clients we get only the primary DNS, dns-server1 with the value "192.168.5.1".
Scheda Ethernet Connessione alla rete locale (LAN):
Does the CLI not hiccup when you enter the "set dns-serverx" commands? I though that you entered them all on the same line separated by spaces. It's been a while and I may be wrong here. Also I have yet to see a 5.6.x CLI. Things may have changed since I have done this.
We did it in the GUI and separated the IP's by comma as mentioned in the manual. Afterwards I was checking in the CLI if they are all written properly down and it seems to because they are all listed correctly in CLI.
set dns-server1 192.168.5.1
set dns-server2 172.17.36.60 set dns-server3 220.127.116.11