Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
CAD
Contributor

Block Team viewer in my Network

Hello,

i am running forigate200D 5.2.3 .

I have tried to block Team viewer by adding signature from application control but not successfully still working please look screenshot to advise me .

 

thanks

6 REPLIES 6
CAD
Contributor

any update?

netmin
Contributor II

Teamviewer may also connect via http/https to their (proxy) servers.  In addition to blocking TCP port 9538 in general, we have  added "teamviewer.com" (no wildcards, it captures second-level domains as well) to a custom web rating override category (i.e. "blacklist"), which is blocked in the web filter profile (using certificate inspection only). This should improve the detection/blocking in general.

MrSinners

While this is very trivial, ensure that the correct firewall policies apply the AC and or web-filtering profiles.

dhruba91
New Contributor

cad wrote:

Hello,

i am running forigate200D 5.2.3 .

I have tried to block Team viewer by adding signature from application control but not successfully still working please look screenshot to advise me .

[attachImg]https://forum.fortinet.com/download.axd?file=0;134777&where=message&f=team.jpg[/attachImg]

 

thanks

Please give the solution ...

CAD

application control signature working fine, after upgrade firmware to 5.2.8

Neophron

The solution has been given, please read the other comments.

The last one from Mr. Sinners is important but sometimes forgotten, make sure you apply the application control to the right policy in order to work :) Goodluck.

Labels
Top Kudoed Authors