Automatic Device Detection only working for one subnet.

[obrienw]

FG110C, 5.0.7 Our LAN has 5 subnets, but all internet access is routed to the 10.0.0.0/24 subnet that the FortiGate port1 interface is on. The device detection is turned on, but only devices on the 10.0.0.0/24 subnet appear. How do I detect all the devices the FG is protecting?

[Carl_Wallmark]

Device detection is based on L2 networks, if its routed you will not detect all devices.

[Matthew_Mollenhauer]

If you' re running a Windows/Mac environment you could look at getting FortiClient licences for each machine. Regards, Matthew