Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Vivek_Abhani
New Contributor

3G Modem Connection Issue with Fortigate FG110C

Hello Everyone, Hope you are doing good. Actually, I am new to Fortigate and trying to configure my Reliance 3G modem with FG110C. I would like to use this 3G modem as dedicated WAN link for my Fotigate unit. I get below errors while configuring: ============================ id=37637 msg=" pppd is started" chat: abort on (BUSY) chat: abort on (NO DIAL TONE) chat: abort on (NO DIALTONE) chat: abort on (NO CARRIER) chat: abort on (NO ANSWER) chat: abort on (ERROR) chat: send (atz^M) chat: expect (OK) scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 scan_usb_dev():597 chat: alarm chat: Failed Connect script failed id=37638 msg=" pppd is exiting" modem: PPP has disconnected (248). redails:4 isp:0 dev:/dev/ttyusb1 tel:#777 modem state changed: 2(dialing) -> 4(hangingup) modem state changed: 4(hangingup) -> 0(uninit) modem state changed: 0(uninit) -> 1(inactive) modem: Launch modem due to manual dial. modem: Begin dialing: redials left = 1 modem state changed: 1(inactive) -> 2(dialing) ================================= I also attach error screenshots here. Could anyone please guide me? Thanks a lot in advance!! Thanks & Regards, Vivek Abhani
0 REPLIES 0