Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Dubos
New Contributor III

Сonverting HA cluster to standalone

We have a HA active-passive cluster of two FortiGate 600D, I turned on the standalone mode on the Master due to some problems(https://community.fortinet.com/t5/Fortinet-Forum/accidentally-rewrote-the-interface/td-p/201847), and I returned access to it, but the Slave is still unavailable to manage. How do I convert it too into standalone mode?

With respect,

Daniil Dubosarskij

cit.rkomi.ru

With respect, Daniil Dubosarskij cit.rkomi.ru
11 REPLIES 11
Dubos
New Contributor III

I have already tried to change the address in the data center when connecting to the device, but in "edit port" was written "set vdom root". In short, I write "set?" to find out which commands are available and there is no "ip" and "mod" to change its address.

With respect,

Daniil Dubosarskij

cit.rkomi.ru

With respect, Daniil Dubosarskij cit.rkomi.ru
Debbie_FTNT

You should have the option 'set mode static'.

Once that is set, 'set ip' becomes available.

If you do a 'show full', does it include 'set mode dhcp', for example?

+++ Divide by Cucumber Error. Please Reinstall Universe and Reboot +++
Labels
Top Kudoed Authors