FortiWeb
A FortiWeb can be configured to join a Security Fabric through the root or downstream FortiGate.
gsharma
Staff
Staff
Article Id 363804
Description This article indicates the command needed to check the Hardware address of the interface.
Scope FortiWeb.
Solution

A MAC address (media access control) is a unique identifier that is allocated to the NIC (network interface controller).

 

To check the MAC address of the FortiWeb interface below command can be used:

 

# Neo-kvm29 # diag hardware nic list port1 | grep HWaddr

Port1 is used in the example above, however port can be changed according to the requirement.

 

nic1.JPG

 

Note:

Make sure the word after grep is case sensitive as above.