Technical Tip: Diagnose hardware check disk fail

[gsharma]

Description	This article explains the log analysis of the diag hardware check, the logdisk status failure, even if logging is working properly.
Scope	FortiWeb.
Solution	To do the hardware test, it gives the result of all hardware components. There is a command: FWB # diagnose hardware check logdisk logdisk check Fail   <-- size Fail 59 disk-number Pass 1 ************************************************ The size failure is because of a size calculation issue, which does not affect log disk functionality. Disk-number fail, on the other hand, is a hardware issue. If logging works properly and disk status shows valid, then this can be ignored.