Technical Tip: Configuring an 'Account Code' to make some restricted calls

[JordAnge]

Description	This article describes how to configure Account Codes into a UserPrivilege (used by different extensions) to restrict International-calls.
Scope	FortiVoice.
Solution	Go to Security -> User Privilege -> Account Code, configure a new profile, and define the 'Code'.  Note: The 'Code' can be used to restrict International, Long Distance, Local, or Internal calls.            In this example, the 'Code' will be used to restrict International-calls. Enable 'Shared' to use this code on any extension. Go to Security -> User Privilege. From the section 'Call Restriction' set "Allo International call: Allowed with Account: Select the profile previously created over the 'Account Code' field. Go to Extension -> Extension  -> IP Extension, and select the extension-id.  From the User Setting -> Management, select the User Privilege profile where call-restriction was enabled. Note: The FortiVoice system uses the Location settings (PhoneSystem -> Settings) to identify the prefix for: LongDistance (Long-distance prefix). International (International prefix). Internal (Area code). config pbx location   set country Dominican Republic   set area-code 809 829 849   set main-number 8092218000   set domestic-prefix 011   set international-prefix 1   set emergency-number 911   set default-timezone 16 end