DescriptionThis article describes how to configure Multi-location between an enterprise unit and a series D (SMB) FortiVoice. There are special considerations the administrator needs to be aware of at the moment to deploy this solution.
SolutionSeries D (SMB) Unit Configuration
Go to Phone System > Profiles > Multilocation and configure as follow:
Enterprise Unit Configuration
Go to Trunks > Office Peers, create a new profile and configure as follows:
Then go to Call Routing > Outbound, and create a new route and configure it as follows:
Important considerations.
- SMB must be configured as Master.
- In the Enterprise Office Peer profile, the name on the authentication settings must be "FortiVoice", and it is case sensitive.
- The user key configured in SMB must be configured the same as the authentication password in Enterprise Office Peer profile.