Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiSwitch
vpatil
Staff
Created on
DescriptionThis article describes the commands to verify the status of a specific process and the command to kill the process on the FortiWLC.ScopeFortiWLC v8.6.Solution
Get into the 'dli' mode using the 'dli' command.Ex...
vinodhk
Staff
Created on
Edited on
Description
This article provides the command in the FortiWireless Controller, which can be used to Enable/Disable the WebCLI option.
Scope
AP, FortiWLC, Wireless Troubleshooting.
Solution
WebCLI is the Command Line in...
harshithbn
Staff
Created on
Edited on
DescriptionThis article explains the patch file requirement before initiating upgrade of FortiWLM to 8.6.5 from 8.6.4 or 8.6.3 firmware.ScopeFortiWLM.Solution
Restoring a backup file for a FortiWLM after upgrading to ...
vpatil
Staff
Created on
DescriptionThis article describes why the FortiWLC and the FortiAP firmware versions do not match the new v8.6-7 release and the steps to upgrade the FortiAP firmware to match it with the FortiWLC firmware.ScopeFortiWLC-...
vinodhk
Staff
Created on
Description
This article describes how the proxy ARP can be enabled on the APs per SSID when the APs are managed by the Wireless Controller.
ScopeProxy ARP, Wireless Troubleshooting, SSID, AP.Solution
Proxy ARP can be e...
harshithbn
Staff
Created on
DescriptionThis article describes how to distinguish SIP phones from general stations in FortiWLCScopeFortiWLC, Wireless Controller, Phones, SIPSolution
Typically, all station information can be found in FortiWLC under M...
ssteo
Staff
Created on
DescriptionThis article describes how to enable voice-enterprise under wireless-controller vap profile.ScopeFortiGate Wireless controller.Solution
The below example shows two vap profiles configured:
config wireless-co...
ehamud
Staff
Created on
Edited on
Description
This article describes how to create a new SSID on Bridge mode using VLAN dedicated for stations.
Scope
FortiOS 7.2.4 below and above versions.
Solution
Create a new VLAN with its DHCP scope:
...
Can't find what you are looking for?
Suggest New Article