Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiSwitch
Created on
Edited on
Description
This article describes how FortiGate Trigger Automation-stitch with Multiple Events.
ScopeFortiGate.Solution
In automation-stitch, the user can set multiple events by event log_id.
For example, if the trigg...
Created on
Edited on
Description
This article describes that when configuring Action Parameters, such as %%log%%, for a custom CLI action, attention must be paid to the following aspects:
The value of %%log%% will be substituted with field...
Created on
Automation stitch to Export IPS Signature database to email whenever there is an IPS Database update
Description
This article describes how to export IPS signatures using Automation stitch whenever there is an IPS signature database update to the email.
ScopeFortiGate v7.0+.Solution
Create Automation Trigger
Go to Secur...
Created on
Edited on
Description
This article describes how to make an Automation stitch that monitors and adds remote IP addresses associated with failed SSL VPN logins to a permanent block list.
ScopeFortiGate, SSL VPN.Solution
The FortiGa...
Created on
Edited on
Description
This article describes that after configuring the automation stitch to configure the webhook automation action, including following the documentation:
Webhook action | FortiGate / FortiOS 7.4.1 | Fortinet Doc...
Created on
Edited on
Description
This article describes how to troubleshoot or monitor an IPSEC tunnel that has sudden communication issues with the remote site even though both phases 1 and 2 are still up and the remote network/device sho...
Created on
Edited on
DescriptionThis article discusses the generation of automatic scripts whenever an automation stitch is triggered.ScopeFortiGate.Solution
Let's consider that there is an automation stitch configured on the FortiGate to ...
Created on
Edited on
Technical Tip: Using automation stitches to Enable/Disable IPV4 Firewall Policy based on SD-WAN logs
Description
This article is a solution when there is an SD-WAN, and the user wants to allow the traffic to use only a specific link, when this link is down, the firewall should drop the packets instead of allowing them t...
Can't find what you are looking for?
Suggest New Article