Troubleshooting Tip: CPU high on FortiSwitchRugged-112D-POE

[rmittal]

Description	This article describes how to resolve a known issue users might face with high CPU on FortiSwitchRugged-112D-POE.
Scope	FortiSwitch Rugged-112D-POE.
Solution	Run the below command in switch CLI to check if the zebra process is consuming the CPU. diagnose sys top Run Time: 1 days, 5 hours and 7 minutes 49U, 50S, 1I; 487T, 295F            zebra 716 S 78.8 1.2       fortilinkd 767 S 7.5 1.7 Workaround: Enter the command in switch CLI. diagnose ip router command zebra cmd-conf-term "no fpm address 127.0.0.1 Note: The command will get removed if the switch is rebooted and it is necessary to re-enter the command on the switch. Fix: The above issue is fixed in the below FortiSwitch versions: 7.4.4 and 7.6.