Facing issue with FortiSOAR Connector Engine

[Jitesh]

Hi,

I'm writing to seek assistance with an installation issue I'm encountering while attempting to set up the FortiSOAR Connector Engine on my system.

Following the provided installation instructions, I executed the following commands:

• git clone https://github.com/fortinet-fortisoar/fortisoar-connector-engine
• cd ./fortisoar-connector-engine
• source <env_path>/env/bin/activate (Optional but recommended)
• python3 ./setup.py bdist_wheel
• pip3 install ./build/fortisoar_connector_engine-1.0.0-py3-none-any.whl

However, I encountered the following error during the installation process:

PEP 440 for more details.

  warnings.warn(

usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]

   or: setup.py --help [cmd1 cmd2 ...]

   or: setup.py --help-commands

   or: setup.py cmd --help

error: invalid command 'bdist_wheel'

I have verified that my Python environment is properly configured and that both setuptools and wheel are installed and up-to-date. Despite these measures, the error persists.

Could you please provide guidance on resolving this issue?

#fortisoar error snap shot

[gankit]

Hi Jitesh,

Try replacing the name=f'{s_name}' with 

name='fortisoar_connector_engine' and  version=f'{release_verion}-{build_num}', with 

version="1.0.0.1" under setup.py file and rerun the commands.

[Jitesh]

Thank you for the quick response.

I made changes to setup.py according to your comments. The wheel build was successful.

However, after the wheel build, when I tried to install the package using the command:
pip3 install ./build/fortisoar_connector_engine-1.0.0-py3-none-any.whl

I encountered an error. Please see the screenshot attached.

It would be really helpful if you could provide the correct implementation of setup.py with the correct command.commandsetup.py

[gankit]

Hi Jitesh,

Please execute the command  

• pip3 install <folder-path>/dist/fortisoar_connector_engine-1.0.0.1-py3-none-any.whl