Troubleshooting Tip: How to push multiple VPN profile to FortiSASE end user with Auto Connect option

[vbandha]

Description	This article describes the configuration for pushing multiple VPN profiles to FortiSASE users with the Auto Connect option.
Scope	FortSASE.
Solution	In FortiSASE under the End Point profile, there is this setting: Endpoint connects to FortiSASE VPN. This setting is set to ‘Automatically’ when it is desired to have the user Auto Connect to VPN. However, when using this setting, it does not allow to push multiple endpoint profile to the end user: If it is necessary to push multiple profiles, change the setting to Manual and it is possible to add multiple VPN profiles: Now, if it is desired to have Auto Connect for one of the profiles, select that VPN profile and select ‘Edit’: Under ‘Advanced Settings’ Enable ‘Auto Connect’ and ‘Always Up’ settings and select OK. Select OK again to Save changes to the Endpoint profile. Now this Endpoint profile will be able to push multiple VPN profiles to the end user with Auto Connect enabled for the selected VPN profile.