Technical Tip: How to integrate FortiProxy with FortiAnalyzer

[aahmadbasri]

Description	This article describes how to integrate FortiProxy with FortiAnalyzer.
Scope	FortiProxy 7.0.x, FortiAnalyzer 7.2.x.
Solution	To configure FortiProxy to send logs to FortiAnalyzer, follow these instructions. Check compatibility between the versions of FortiProxy and FortiAnalyzer in use. See the documentation. Configure FortiProxy. Go to Security Fabric -> Fabric Connectors -> FortiAnalyzer Logging -> Edit. This can be done from the CLI by going to: config log fortianalyzer setting     set status enable     set server <FAZ IP> end Select 'OK' and the following will be shown. Select 'Accept'.  The status of FortiAnalyzer will first show as unauthorized: Log in to FortiAnalyzer to authorize the device. Select the alert: Authorize the device. The device can be added to another ADOM if required. After, select 'OK'.  When the status changes to 'success', this means the device has been added to the FortiAnalyzer and will start sending logs as per the configuration.