Technical Tip: FortiNAC-F GUI login during initial setup

[YutoOgura]

Description	This article describes how to log in to the GUI during the initial setup of FortiNAC-F.
Scope	FortiNAC-F.
Solution	This procedure applies after the IP address and routing configuration have been completed using the CLI. After configuring the IP address using the CLI, enter the following URL in the browser address bar. Port 8443 is used for GUI login. https://<IP address>:8443/ The default login credentials are as follows. User: root Password: YAMS If the login is successful, the following screen is displayed. Note:  FortiNAC applications usually take up to 10 minutes to start all processes. If the login screen does not appear, try again after a few minutes. The credentials set on the CLI are not the same credentials used by the FortiNAC application to log in through the browser. Related articles: Technical Tip: Comprehensive guide for a simple FortiNAC deployment Technical Tip: A simple deployment including FortiGate/FortiAP (self-registered guest) Technical Tip: FortiNAC general troubleshooting guide Technical Tip: Useful CLI commands in FortiNAC-OS for troubleshooting