Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiManager
bjazz
Visitor
Created on
Hello, We hace Ha configuration, now we monitor the cluster, And I recieve information from the master, but I dont know nothing about the slave one. What I want to do is to monitor each node instead of monitor the HA clu...
aspnovac
New Contributor
Created on
Hi,We bought an Microsoft Surface Pro 9 which has an ARM processer.The point of buying this was to hook it up with the Fortinet VPN, so we could go anywhere and still be connected.Problem is i can't install it on the Sur...
GaryP
New Contributor
Created on
Good day. My Fortigate 80E suddenly has no logs displayed. All logs were missing or not recorded even on my Forticloud. May I know the reason of this? This just happened today. Previous days it has logs recorded. Thank y...
Liza1
New Contributor III
Created on
Hello, FortiGate-100E # diag sys ntp statussynchronized: no, ntpsync: enabled, server-mode: enabledipv4 server(192.168.0.61) 192.168.0.61 -- unreachable(0x0) S:7 T:684no data I have the following issue: I have activated ...
Mirza_Asad2723
New Contributor II
Created on
Dear Concern, I want to set a limit on a specific SSL-VPN user so that this user can establish multiple connections at the same time. For example, User A should be able to establish SSL-VPN connections from two different...
NiklasE
New Contributor
Created on
Hi,I am looking for some input in to what I might be doing wrong in our new Fortinet setup. We are migrating from another vendor to a full Fortinet access-network consisting of Fortigates, Fortiswitches and FortiAP:s. Th...
jomof
Contributor
Created on
Hello Expert, Can anyone provide guidance to configure stitch for the fortigate to send an email alter when HA is out of sync. Thank you Regards
ChrisM589
New Contributor
Created on
Hi Folks,Our current WAN backup line isnt working, passes traffic fine but we need to implement BGP. I am thinking of gutting it and starting from stratch. We have two fortigates HA A/P config. At the moment it just uses...
Can't find what you are looking for?
Suggest New Article