Troubleshooting Tip: Adding FortiAnalyzer device to FortiManager using wizard failed with message 'Response with errors'

[FTNT_FortiJan]

Description	This article describes how to troubleshoot the issue when encountering the error message "Response with errors" when adding FortiAnalyzer device to the FortiManager.
Scope	FortiManager.
Solution	When following documentation guide to add FortiAnalyzer device to FortiManager using the wizard, users may encounter error message 'Response with errors' in the 'Validate Device' step. To troubleshoot this issue, verify current WorkSpace mode configuration on the FortiManager.   FortiManager GUI -> System Settings -> Advanced -> Workspace: FortiManager CLI: FMG-LAB # show system global     config system global         set adom-status enable         set fgfm-allow-vm enable         set hostname "FMG-LAB"         set workspace-mode workflow     end If 'Workflow (ALL ADOMs)' mode is selected in Workspace Settings, change it to Workspace mode. FortiManager GUI: FortiManager CLI: FMG-LAB # show system global     config system global         set adom-status enable         set fgfm-allow-vm enable         set hostname "FMG-LAB"         set workspace-mode normal     end After changing Workflow mode to Workspace mode, adding FortiAnalyzer to FortiManager should be successful. See the related documentation:  Adding FortiAnalyzer devices using the wizard Adding VM devices  Troubleshooting Tip: Failed to synchronize FortiAnalyzer with current ADOM data