Created on
10-29-2020
02:11 AM
Edited on
02-05-2024
01:09 AM
By
Jean-Philippe_P
Description
This article discusses about the How to configure AWS Fabric connector in FortiManager.
Solution
FortiManager Fabric connector.
Collect following information from AWS portal for FortiManager Fabric connector:
-AWS access key ID .
-AWS secret access key .
-AWS region name .
-AWS VPC ID.
Refer to following URL to collect information : https://docs2.fortinet.com/vm/aws/fortigate/6.0/security-fabric-connector-integration-with-aws/6.0.0...
Or follow below steps to collect the information:
1) In the AWS access key ID field, enter the key created in the AWS management portal.

2) In the AWS secret access key field, enter the secret access key accompanying the above access key.3) In the AWS region name field, enter the region name. In the example, ap-southeast-2 denotes Singapore, rather than entering Singapore. Refer to AWS Service Endpoints for the desired region name.
4) In the AWS VPC ID field, enter the VPC ID within the specified region desired to cover with the SDN Connector. Refer below screenshot.5) Add Fabric connector information in FortiAnalyzer.Result.
To check connection between FortiManager and AWS is successful, created dynamic address with SDN Connector. Get result as below.Related document.Note.Observe AWS portal information not matching as per screenshot provided in 1) to 5) this is because AWS changing the GUI tab for enhancement purpose so get in touch with AWS engineer to collect 1) to 5) information if not matching as per above screnshots.
Related Articles