Description
This article describes the procedure to disable the Fortisigconverter service on FortiManager. Fortisigconverter is a Docker-based service, and the steps below explain the procedure to stop and remove it.
Scope
FortiManager.
Solution
Enter the Docker configuration menu by using the following command:
config system docker
set fortisigconverter disable
end
After running the commands, the system will stop and remove the Fortisigconverter service. The output will display the following:
Stopping fortisigconverter
Stopping fortisigconverter_fortisigconverter_1 ... done
Removing fortisigconverter_fortisigconverter_1 ... done
Removing network fortisigconverter_backend
The Fortisigconverter service will then be successfully disabled.
Reset the docker to remove all fortisigconverter volumes by using the following command:
diagnose docker reset fortisigconverter
WARNING! This will remove all fortisigconverter volumes.
Do you want to continue? (y/n)y
Done.
Note: Disabling Fortisigconverter will terminate all related services and remove the associated Docker containers. It is recommended to confirm this action aligns with the operational requirements before proceeding.
