Description |
This article describes how to enable history time filter in SD-WAN monitor. |
Scope | FortiManager |
Solution |
1) By default, FortiManager will only show 10 minutes of data in the SD-WAN monitor.
2) History time filter can be enabled with the following command.
FMG# config system admin setting #(setting) set sdwan-monitor-history enable #(setting) end
3) Now, the history time filter is enabled and data can be filtered accordingly.
|
Hi,
I don't see this command in our CLI reference docs
https://docs.fortinet.com/document/fortianalyzer/7.0.2/cli-reference/535041/admin#admin_setting
https://docs.fortinet.com/document/fortianalyzer/6.4.7/cli-reference/535041/admin#admin_setting
Do we need to enable something before sdwan-monitor-history is available?
Hi Axel,
This is for FortiManager CLI. FortiAnalyzer secure sd-wan monitor will follows the log retention policy.
I would suggest to edit step 2.
Should be "FMG#" instead of "FAZ#"
Thanks!
Thanks for pointing that out! I have submitted the change.