FortiManager
FortiManager supports network operations use cases for centralized management, best practices compliance, and workflow automation to provide better protection against breaches.
ckarwei
Staff
Staff
Article Id 204072
Description

This article describes how to enable history time filter in SD-WAN monitor.

Scope FortiManager
Solution

1) By default, FortiManager will only show 10 minutes of data in the SD-WAN monitor.

 

ckarwei_0-1643764808131.png

 

2) History time filter can be enabled with the following command.

 

FMG# config system admin setting

#(setting) set sdwan-monitor-history enable

#(setting) end

 

3) Now, the history time filter is enabled and data can be filtered accordingly.

 

ckarwei_1-1643764847692.png
Comments
axel_gonzalez_FTNT

Hi, 

I don't see this command in our CLI reference docs


https://docs.fortinet.com/document/fortianalyzer/7.0.2/cli-reference/535041/admin#admin_setting

 

https://docs.fortinet.com/document/fortianalyzer/6.4.7/cli-reference/535041/admin#admin_setting

 

Do we need to enable something before sdwan-monitor-history is available?

ckarwei
Staff
Staff

Hi Axel,

 

This is for FortiManager CLI. FortiAnalyzer secure sd-wan monitor will follows the log retention policy.

axel_gonzalez_FTNT

I would suggest to edit step 2. 
Should be "FMG#" instead of "FAZ#"

Thanks!

ckarwei
Staff
Staff

Thanks for pointing that out! I have submitted the change.

Contributors