Technical Tip: CLI Command to display all entitlement contract for Closed Network

[heng]

Description	This article describes the newly introduced CLI command that enables the administrator to display or show all the entitlement contract information for the entitlement file that is being loaded into FortiManager for the closed network or air-gapped setup.  The CLI command is able to display all the entitlements according to the loaded entitlement file when FortiManager is set to a closed network configuration. From the GUI, go to  FortiGuard -> Settings -> FortiGuard Server and Service Settings -> Enable Communication with FortiGuard Server > Disable. To obtain the entitlement file to be loaded into FortiManager, open a ticket request type Customer Service via the support portal.
Scope	The CLI command is only available in FortiManager v7.0.4 GA, v7.2.1 GA and above.
Solution	Run CLI 'diagnose fmupdate fds-dump subs' to display all the entitlement information for the loaded entitlement file. Example of output: diagnose fmupdate fds-dump subs <output omitted> SerialNumber=FVVM020000199999|Contract=SBCL-1-06-20220725:0:1:1:0*COMP-1-20-20220725:0:1:1:0*IRDB-1-06-20220725:0:1:1:0*FWDB-1-06-20220725:0:1:1:0*FRVS-1-06-20220725:0:1:1:0*FMWR-1-06-20220725:0:1:1:0*FCSD-1-06-20220725:0:1:1:0*ENHN-1-20-20220725:0:1:1:0*AVDB-1-06-20220725:0:1:1:0*SPRT-1-20-20220725:0:1:1:0|AccountID=customer@fortinet.com SerialNumber=FW80CM3910699999|Contract=ZHVO-1-06-20171222:0:1:1:0*SPAM-1-06-20171222:0:1:1:0*SBCL-1-06-20171222:0:1:1:0*COMP-1-20-20171222:0:1:1:0*NIDS-1-06-20171222:0:1:1:0*HDWR-1-05-20171222:0:1:1:0*FURL-1-06-20171222:0:1:1:0*FRVS-1-06-20171222:0:1:1:0*FMWR-1-06-20171222:0:1:1:0*ENHN-1-20-20171222:0:1:1:0*AVDB-1-06-20171222:0:1:1:0*SPRT-1-20-20171222:0:1:1:0|AccountID=customer@fortinet.com <output omitted>