Description This article describes how to avoid static route invalidation when using BFD.   BFD neighborship can be established on the IPsec VPN tunnel interface's IP address.   The requirement is to ensure that the remo...

Description This article describes how to configure multiple active default routes that exist simultaneously in the routing table. Default routes here refer to routes to the internet.   For example, regular connection to...

DescriptionThis article describes that route shows inactive when SD-WAN Performance SLA Configured.ScopeFortiGate, FortiOS v7.4.X.Solution From the output of the command, 'get router info routing-table details 0.0.0.0' t...

DescriptionThis article describes why two default routes are not active at the same time if two ISPs are configured and one of the ISPs is using DHCP/PPPOE mode while the other is using Manual (Static IP).ScopeFortiGate ...

DescriptionThis article describes how to advertise a single IP in the whole Network statically via BGP.ScopeFortiGate.Solution For example, this can happen when advertising 192.168.1.1/32 on BGP statically.   Routing tab...

DescriptionThis article describes the risk of and how to avoid undesired static routes into a FortiGate routing table.ScopeFortiGate.Solution In Fortinet SD-WAN design, it is necessary to configure an interface as an SD-...

DescriptionThis article compares the link health monitor actions and mention a description all of them.ScopeFortiGate.Solution Action Dead Alive Effect during dead state Update static route Flag associated static r...

DescriptionThis article describes how to advertise a static route with a gateway IP in the BGP or ADVPN.ScopeFortiOS 6. x.x, 7. x.x.Solution If an advertised static route in the BGP includes a gateway IP, the BGP next ho...