Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiGate
Created on
Description
This article describes an issue where radiusd.service failed to start, and status shows as 'Inactive'.
ScopeFortiNAC.Solution
Restarting the radiusd.service from CLI does not help.
> systemctl restart...
Created on
DescriptionThis article describes how to increase the hard drive size in a FortiNAC virtual appliance.ScopeFortiNAC.Solution
From the Console of the Virtual Appliance:
Power off the virtual machine (VM) whose disk space ...
Created on
DescriptionThis article describes how to find the correct RADIUS Attribute values stored by FortiNAC and create a 'User Host Profile' by using the correct RADIUS Attribute values.ScopeFortiNAC, FortiNAC -F.Solution
When ...
Created on
DescriptionThis article describes how to configure user acknowledgement for VLAN Switching with Persistent Agent so the user can accept or deny changing the VLAN.Scope
FortiNAC-F 7.4, 7.6.
Persistent Agent 9.4.4 or 10.7....
Created on
DescriptionThis article describes how to fix the Network -> Service Connector view after loading the page without any options returned to be able to configure a Service Connector. Options are shown to 'Create New', 'E...
Created on
DescriptionThis article describes how to change Default Enforcement on an SSID by using CLI.ScopeFortiNAC, FortiNAC-F.Solution
FortiNAC does not allow to change Default Enforcement as 'deny' or 'bypass' by using GUI. How...
Created on
Edited on
DescriptionThis article describes how to configure FortiNAC to send SSO tags to a Downstream FortiGate in a Security Fabric environment.ScopeFortiNAC -F, FortiNAC.Solution
In a Security Fabric environment, if FortiNAC le...
Created on
Edited on
Description
This article explains the steps to take if the primary server fails over to the secondary due to a health check failure of the 'radiusd' service.
Scope
FortiNAC-F: 7.2.8.
Solution
After upgrading to...
Can't find what you are looking for?
Suggest New Article