Troubleshooting Tip: netflow sampler can not be enabled on an EMAC-Vlan interface

[lcamilo]

Description	This article describes why the error 'Netflow sampler isn't supported on EMAC VLAN interface..' is displayed when enabling 'netflow-sampler' on an EMAC-VLAN interface type.  config system interface     edit "emac_netflow"       set vdom "root"       set ip 10.11.12.13 255.255.255.0       set type emac-vlan  <= EMAC-vlan type       set role lan       set snmp-index 9       set interface "port1"     next end FG_72x # config system interface FG_72x (interface) # edit emac_netflow FG_72x (emac_netflow) # set netflow-sampler both Netflow sampler isn't supported on EMAC VLAN interface..
Scope	FortiGate.
Solution	Enabling 'netflow-sampler' on an EMAC-VLAN interface type requires FortiOS 7.2.1 and higher.  The configuration can be enabled successfully through the same steps on a FortiGate running firmware 7.2.1.   References:  Technical Tip: How to Configure Netflow - Fortinet Community   NetFlow | FortiGate / FortiOS 7.6.0 | Fortinet Document Library Enhanced MAC VLAN | FortiGate / FortiOS 7.6.0 | Fortinet Document Library