Technical Tip: Strong Password 'Password Policy' feature

[hrahuman_FTNT]

Description

This article describes that since FortiOS 4.0 MR1, there is a new feature that enables FortiGate administrator passwords to adhere to strict requirements. This includes proper aging attributes attached, so that passwords must be changed on a continual basis.

Scope

FortiGate.

Solution

To enable password options:

1. Go to System -> Admin -> Setting.
2. Select Enable for the Password Policy, and edit the options as required.

To enable using CLI:

config system password-policy

        set status enable
    end

For version V4.0 MR1:

#FGT (password-policy) # get

status : enable
apply-to : admin-password
minimum-length : 8
must-contain :
change-4-characters : disable
expire : 0

config system password-policy

  set status [enable | disable] # default is disable
  set apply-to [admin-password ipsec-preshared-key] # default is admin-password
  set minimum-length xxx # default is 8

  set must-contain [lower-case-letter upper-case-letter non-alphanumeric number] # default is NULL
  set minimum-characters-change 4 #default is 0, when not zero, it requires to change at least N characters for password change
  set admin-password-expire xxx # Unit=DAYS before expire. Default is 0, means never expire

end

config system admin

    edit xxx

        set password-expire YYYY-MM-DD HH:MM:SS # default 0, means never expire.

        set force-password-change [enable | disable] # initially set to disable, when set to enable, user must change his password next     time he logs in

    next

end

For version V5.4 and above:

config system password-policy
    set status enable  # default is disable
    set apply-to admin-password [admin-password ipsec-preshared-key] # default is admin-password
    set minimum-length 8 # default is 8
    set min-lower-case-letter 0
    set min-upper-case-letter 0
    set min-non-alphanumeric 0
    set min-number 0
    set change-4-characters disable
    set expire-status disable Default is 0, means never expire
    set reuse-password enable
end

config system admin
    edit xxx
        set password-expire YYYY-MM-DD HH:MM:SS # default 0, means never expire.
        set force-password-change [enable | disable] # initially set to disable, when set to enable, user must change his password next     time he logs in
    next
end

Note:

In the latest FortiOS version, both options can be specified in the GUI, but in the CLI, it is necessary to enable both options manually.

Selecting only 'Admin' affects only the Admin settings. Choosing only 'IPsec' changes only the IPsec settings. Selecting both impacts both Admin and IPsec settings

Related articles:

Technical Tip: Configure password policy for locally defined administrator passwords and IPsec VPN p... 

Troubleshooting Tip: Password renewal with password complexity for local SSL VPN user is not working...