Technical Tip: SSL VPN feature cannot be enabled from GUI in FortiOS v7.4.4 and above

[Ylli_Seitaj]

Description	This article describes that the SSL VPN feature cannot be enabled from GUI in FortiOS v7.4.4 and above.
Scope	FortiGate.
Solution	By default, the SSL VPN feature is not enabled, as shown below: The SSL VPN feature cannot be enabled from the GUI because there is no option to enable it after going to 'System' -> 'Feature Visibility', as shown below: The only way to enable the SSL VPN feature is by executing the following commands in the CLI: config system settings     set gui-sslvpn enable end In a multi-VDOM environment, execute the following commands: config vdom     edit <vdom-name>         config system settings             set gui-sslvpn enable         end end After executing the commands on the above link, the SSL VPN feature will be enabled, as shown below: Related document: Changes in default values