Created on 10-26-2004 12:00 AM Edited on 06-05-2022 10:41 PM By Anthony_E
Article
Description |
This article describes that RSA SecurID authentication integrates with RADIUS servers and is supported by the FortiGates.
FortiGates support user authentication to a RADIUS server, among others. It is possible to add the name of a RADIUS server to the FortiGate user database to allow users to authenticate using the selected RADIUS server.
It is possible to disable a user name so that the user cannot authenticate. |
Products | FortiGates running FortiOS 2.8 and 3.0 firmware. |
Steps or Commands |
To enable authentication, it is necessary to add user names to one or more user groups. It is possible to add RADIUS servers to user groups.
When a user group that contains RADIUS server is selected to authenticate, the RADIUS server goes through the RSA ACE/Server to complete the authentication.
Through RADIUS servers, RSA SecurID authentication applies to the following FortiGate features: - Any firewall policy with Action set to ACCEPT. - IPSec dialup user phase 1 configurations. - XAuth functionality for phase 1 IPSec VPN configurations. - PPTP. - L2TP.
For information on configuring a RADIUS server on a FortiGate, see the FortiGate User Authentication Guide on the Technical Documentation web site. |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.