Technical Tip: No server found for update when trying to connect to FortiGuard Server

[rvillaroman]

Description	This article describes how to fix the 'No server found for update' error when trying to connect to the FortiGuard Server.
Scope	FortiGate.
Solution	'No server found for update' error when trying to connect to the FortiGuard Server. In this example, the set type of connection is none, and include-default-servers are disabled. With this setup, the FortiGuard is unable to connect to any default server. If FortiManager is in use to connect to FortiGuard Server, the set type should be FortiManager; if FortiManager is not part of the setup, the set type can be FortiGuard or none. When the set type is FortiGuard: config system central-management     set mode normal     set type fortiguard end When set type is none, include-default-servers must be enabled: config system central-management     set mode normal     set type none     set include-default-servers enable    end To use type FortiGuard or none, make sure that set cloud-communication is set to enable under the global settings  config system global     set cloud-communication enable end Output after update: FortiGate can connect and update to the FortiGuard Server. Related articles: Technical Tip: FortiGuard Overview and Troubleshooting Technical Tip: Unable to Contact FortiGuard Servers Due to an Unknown CA and 'Error: 19 (self-signed... Technical Tip: ICMP to FortiGuard Distribution Servers (FDS)