Troubleshooting Tip: 'Local Reports' is not available under 'Feature Visibility'

[mramalinga]

Description

This article describes why Local reports is not available under 'Feature Visibility'.

Scope

FortiGate.

Solution

Sometimes, the 'Local Reports' option is missing under System -> Feature Visibility.

Check if the 'Enable Local Reports' option is enabled under Log & Report -> Log Settings.

To enable it through the CLI, run the following CLI configuration:

config report setting
    set pdf-report enable
end

Note: 

This command is only available for specific models. Supported and non-supported models are listed at the following link: config report setting.

‘Local Reports’ will become available under 'Feature Visibility' afterwards.

To schedule when reports are generated, refer to this document: Report Page