Technical Tip: Interpret the output 'diagnose test application wad 21'

[imathew]

Description	This article describes how to interpret the output of 'diagnose test application wad 21'.
Scope	FortiGate.
Solution	diagnose test application wad 21 TCP stats: active=29890 accepts=0 connects=83701245 accept_err=0     connect_err=87970 bind_fails=0 make_failure=0 connected=83480214     too_many_write_blocks=3653990 read_end_write_blocked=0     timer start/timeout=86241156/4177     TCP port: without_ses_ctx:0 with_ses_ctx:29890 connect_err: This could be caused by source port exhaustion or connection failure. timeout: This could be another reason that causes disconnection. As mentioned before, the connection will be closed if there is no data in it for a long time (TTL, 1 hour by default). too_many_write_blocks counter keeps increasing. It means the peer of FortiGate cannot receive the data that is sent from FortiGate in time. The potential cause could be that some clients of the web proxy cannot read the data (busy with something else). Or, most of the clients are uploading data to the servers, but the web proxy WAN side upload bandwidth cannot satisfy the requirement. connect_err: can be fixed by resolving the source port exhaustion issue. Enlarge 'ip-source-port-range' or use IPPool if it is possible.  too_many_write_blocks: It looks like a condition limitation.  timeout: It is as expected. Try to enlarge 'system.session-ttl.default'.