Technical Tip: How to upgrade firewall if VDOM is enabled

[rmreddy]

Description	This article describes how to upgrade the firewall if the VDOM is enabled.
Scope	FortiGate.
Solution	There is speculation that if VDOM is enabled, it needs to upgrade the firmware to the specific VDOM and it does not apply to all VDOMs. Firmware is based on the hardware and virtual appliance, not on the VDOM base, so the upgrade option will be available in global VDOM only which is applicable for global change. To upgrade the firmware when VDOM is enabled, enter the global VDOM, navigate to System -> Firmware & registration, and follow the normal upgrade process. To upgrade the firmware, follow the below link: Technical Tip: How to upgrade FortiGate firmware. If the devices are in HA, refer to the below document for upgradation: Upgrading FortiGates in an HA cluster. In case of a failed upgrade, the previous firmware and configuration can be reverted by booting FortiGate with the secondary partition and following the instructions in the below KB article: Technical Tip: Selecting an alternate firmware for the next reboot.