Description
This article describes that in FortiOS v5.0 or higher, it is possible to enable the Fortinet bar (FortiBar) on the web page to show the remaining browsing quota.
The Quota has to be enabled on the web filter monitored categories, and the web filter has to be applied on the firewall policy to enable Proxy Options (see: Category usage quota). In the current design, the FortiBar is only implemented only HTTP traffic (the feature does not work with encrypted HTTPS traffic) and it operates by injecting HTML elements into the website directly as part of proxy traffic inspection.
The Quota has to be enabled on the web filter monitored categories, and the web filter has to be applied on the firewall policy to enable Proxy Options (see: Category usage quota). In the current design, the FortiBar is only implemented only HTTP traffic (the feature does not work with encrypted HTTPS traffic) and it operates by injecting HTML elements into the website directly as part of proxy traffic inspection.
Important Note: As of FortiOS 6.4.2, FortiBar is deprecated and has been removed from FortiOS. This article is retained for legacy purposes only.
Scope
FortiOS 5.x and 6.x up to FortiOS 6.4.2.
Solution
Configuration via the GUI.
Policy & Objects -> Policy -> Proxy Options -> Web Options -> Add Fortinet Bar.
Configuration via CLI.
config firewall profile-protocol-options
edit <profile_name>
config http
set fortinet-bar enable
end
next
end
Fortinet bar showing the remaining browsing quota.
Browsing is blocked once the quota limit is reached.
